This evening I received an e-mail from someone wanting to know how to use the MV-1 with the F6. At about the forth or fifth step, I wondered if a brief video might be more appropriate. So without further delay, here’s a brief how-to with the Nikon MV-1. You’ll see it’s pretty straight forward. Cheers, JBC.
A couple of finer points:
- You’ll notice the odd angle (it seems odd to me at least) the MV-1’s cord connects to the camera. My digital camera’s 10-pin port connects ‘normally’ – as in, the cord flowing down the camera instead of up as shown above. Make sure you don’t try to force the cord’s plug in the wrong way. It’ll damage the pins and cause all kinds of problems.
- Make sure you do this with the camera OFF. Anything that might cause problems – especially in the electrical components of the camera – can be neutralized by making sure the camera is turned off when you attach something. This includes mounting and un-mounting lenses, by the way.
- You may notice I have a roll of film in the camera in the video. It’s on frame 35. This roll’s data will not be extracted from the camera during this session. Just the rolls that are complete.
- When I remove the MV-1 from the camera, the only data left in the camera’s memory will be that of the still-loaded roll. You should use the MV-1 when the camera is empty – but not for any technical reasons other than you’ll get all the rolls shot until that point. You won’t hurt anything using the MV-1 mid-roll.
- I leave all previous roll’s data on the CF card as a back up. They’re also copied into the computer, but having another copy of them on the CF card just makes sense to me. They’re small files and even the relatively small 128Mb CF card can last several life time’s worth of the tiny shooting data files.